Specialty Tools
Below you will find a listing of the products and companies associated with Specialty Tools. The default view features products organized by company. To modify the view, use the Product tab to sort by product name, or the Company tab to view the companies associated with this section. Use the Most Recent tab to sort listings by latest modified, or the A - Z tab to sort by alphabetical order. Or navigate through additional category options on the left.
Featured Listings
- Zendex
-
American manufacturer of the GoJak, RakJak, SpeedBlaser, HotSpot, QuickSpiff, WheelChock and accessories....
[View Company Profile and Product Listings] 
-
-
- 6508 Master Disconnect Tool Set
- OTC offers their 6508 Master Disconnect Tool Set covering most domestic vehicles. Applications covered by the kit include A/C lines, fuel lines, heate...
-
-
- 6530 Ball Joint Super Set
- OTC has unveiled their 6530 Ball Joint Super Set, which combines 3 other kits for expanded ball joint removal and installation services on GM and Ford...
-
-
- 6550 Master Fuel Injection Kit
- New from OTC is 6550 Master Fuel Injection Kit, which works with every OTC fuel injection fitting. Ideally suited for diagnosing fuel-related problems...
-
-
- 8031 Ball Joint Set
- OTC has unveiled their latest Ball Joint Set for use on Chrysler/Jeep Trucks and SUVs. According to the company, the 8031 set offers greater serviceab...
-
-
- Ball Joint Super Set
- OTC offers a ball joint super set (Part #6530) that allows for easier and faster for removal and installation of press-fit ball joints and universal j...
-
- See More Products from OTC, an SPX brand
-
-
-
- XZN Stubby Triple-Square 1/4" Drivers set, No. XZNS412
- VIM Tools' Six-Piece XZN Stubby Triple-Square 1/4" Drivers set, No. XZNS412, includes sizes 4mm, 5mm, 6mm, 8mm, 10mm and 12mm. The impact-quality S2 s...
-
-
-
-
- 1/2" Drive 20EPL TORX Plus Internal Low-Profile Socket
- The 1/2" Drive 20EPL TORX Plus Internal Low-Profile Socket from Snap-on Tools was created exclusively for applications on QR25 Nissan motors with auto...
-
-
- 1/2" Triple Square Socket Drivers
- Snap-on's 1/2" Triple Square Socket Drivers offer improved access in servicing VW Touaregs, Audis, and Detroit Diesel 900 and 4000 engines. The new so...
-
-
- 1/2"-drive 18 mm Triple Square Socket No. STSM18E
- The Snap-on Tools 1/2"-drive 18 mm triple square socket, No. STSM18E, is specifically designed to remove and install rear axle bolts found on 2006 Vol...
-
-
- 3/8" drive short #3 Phillips socket driver, No. FPS32E
- Snap-on introduced its 3/8" drive short #3 Phillips socket driver, No. FPS32E, for techs working on high-torque applications such as Honda or Acura br...
-
-
- Axle Seal Remover Kit, No. ASR960
- The Axle Seal Remover Kit, No. ASR960, from Snap-on Tools allows technicians working on front wheel drive transmissions to easily remove seals in one...
-
- See More Products from Snap-on
-
-
-
- 14mm spark plug thread repair insert kits for all aluminum and Ford Triton heads
- Insert kits for aluminum and Ford Triton heads Goodson now has 14mm spark plug thread repair insert kits for all aluminum and Ford Triton heads in 4.6...
-
-
- 90-degree bore gauge
- A bore gauge with more reach Goodson's 90-degree bore gauge is designed to measure cam bores, main bores and other hard-to-reach areas directly. The 9...
-
-
- drill fixtures for Ford 4.6L
- Drill fixture for Ford 4.6L Goodson's drill fixtures for Ford 4.6L have extra dowel holes for different applications. Two drilled holes provide an ope...
-
-
- Gas Porting Tool Kits
- Virtually eliminate side ring clearance by drilling gas ports in piston ring lands with the help of Goodson's Gas Porting Tool Kits. These ports appl...
-
-
- Neway 50 and 55 valve seat cutters
- Goodson cutters tailored to high performance applications The Neway 50 degree and 55 degree valve seat cutters by Goodson provide tungsten carbide cut...
-
- See More Products from Goodson
-
-
-
- Electronic Park Brake service/configuration tool
- The Electronic Park Brake service/configuration tool from Strategic Tools & Equipment Co. that enables technicians to service and replace brake pa...
-
-
-
-
- Belt-molding Removal Tool, No. 45049
- Mayhew Tools' Belt-molding Removal Tool, No. 45049, removes window belt moldings on foreign and domestic vehicles. Works effectively with most clips,...
-
-
- CatsPaw CatsPack No. 66313
- The Mayhew Tools six-piece CatsPaw CatsPack pick up tool set, No. 66313, contains the Lighted Pick Up Tool, Lighted Pen Pick Up Tool, Pick Up Tool Pou...
-
-
- CatsPaw Flexible Lighted Pick Up Tool No. 45048
- The Mayhew CatsPaw Flexible Lighted Pick Up Tool, No. 45048, extends from 8" to 25". Magnetic on both ends, the tool includes a flexible shaft and thr...
-
-
- Lighted Pen Pick-up Tool
- The CatsPaw Lighted Pen Pick-up Tool by Mayhew was designed specifically for professional automotive technicians. The tool packs over 2 lbs. of pullin...
-
-
- Magnetic Telescoping Flashlight Pick Up Tool
- Catspaw combines pick-up with LED power Mayhew Tools has added a Magnetic Telescoping Flashlight Pick Up Tool to its CatsPaw line. The tool has a magn...
-
- See More Products from Mayhew Tools
-
-
-
- 29" HT-2FL Flexible Magnetic Pick-Up Tool
- Ullman's 29" HT-2FL Flexible Magnetic Pick-Up Tool is comprised of an aluminum shaft that the manufacturer says can be bent at any angle in order to r...
-
-
- Flexible Inspection Mirror No. HTC-2FL
- Ullman offers their HTC-2FL Flexible Inspection Mirror tool, which is comprised of a 32" long aluminum shaft that can be bent at any angle in accessin...
-
-
- GM-2L extra long magnetic pick up tool
- Ullman's GM-2L extra long magnetic pick up tool features a goblet magnetic shaped head that was designed to lift 16lbs., without the sides attaching t...
-
-
- HT-2FL Flexible Magnetic Pick-Up Tool with Powercap
- New from Ullman is their HT-2FL Flexible Magnetic Pick-Up Tool with Powercap. This tool, which has a lifting capacity of 5 lbs., can retrieve dropped...
-
-
- HT-5 Pocket Telescopic Magnetic Pick-Up tool
- Ullman offers their HT-5 Pocket Telescopic Magnetic Pick-Up tool with the company's detachable Powercap feature, which allows for shielding the sides...
-
- See More Products from Ullman Devices Corp.
-
-
-
- Extendable Bendable Magnetic Pick-Up Tool, No. 07569
- Master Magnetics' redesigned Extendable Bendable Magnetic Pick-Up Tool, No. 07569, features a neodyium magnet to lift up to 3 lbs. on a retractable, b...
-
-
- Heavy Duty Magnetic Bulk Parts Lifter with Release
- Master Magnetics' Heavy Duty Magnetic Bulk Parts Lifter with Release are ideal for the safe and rapid pickup, transfer and release of ferrous metal pa...
-
-
-
-
- 12mm and 16mm Compression Test Adapter for Ford Triton Engines
- S & G Tool Aid's 12mm and 16mm Compression Test Adapter for Ford Triton Engines, No. 34020, features a dual-threaded male end that provides two ad...
-
-
- The Strutter™2 MacPherson Strut Coil Spring Tool
- Strut Your Stuff "The Strutter"™2 MacPherson Strut Coil Spring Tool from S'G Tool Aid quickly and easily services the MacPherson Struts found on...
-
-
- Tire Valve Core Tool, No. 65150
- S & G Tool Aid's Tire Valve Core Tool, No. 65150, removes/installs tire valve cores. The shaft extends 2" beyond the handle to allow for easy acce...
-
-
-
-
- 24mm flare nut wrench 66150
- SP Tools’ 24mm flare nut wrench, No. 66150, is designed to slide back into the recessed area of the cylinder head, where the fuel line retainer...
-
-
- 62020 Fan Clutch Wrench Set with Rack
- SP Tools developed the 62020 Fan Clutch Wrench Set with Rack for Chrysler, Ford, GM, Land Rover and Mazda vehicles, especially for bolt-on pulleys. Th...
-
-
- 64300 harmonic damper pulley holding tool
- New from Schley Products is their 64300 harmonic damper pulley holding tool for removing and installing the crank bolt on Lexus and Toyota engines. Th...
-
-
- 64500 GM Harmonic Damper Holding Tool for trucks and SUVs
- New from Schley Products is their 64500 GM Harmonic Damper Holding Tool for trucks and SUVs. The new tool helps deliver faster crank bolt removal and...
-
-
- 64900 GM/Chrysler Harmonic Damper Pulley Puller
- Schley Products has re-engineered their 64900 GM/Chrysler Harmonic Damper Pulley Puller, which eliminates the need to remove the radiator in getting t...
-
- See More Products from SP Tools
-
-
-
- Cadillac Socket Head Drain Plug Wrench No. 6532
- A&E Hand Tools introduces the Cadillac Socket Head Drain Plug Wrench, No. 6532, under its Kastar brand. The new wrench offers a low profile design...
-
-
- Clutch Master Cylinder Pin Press No. 475A
- The Clutch Master Cylinder Pin Press, No. 475A, from A & E Hand Tools, allows service to the clutch master cylinder and hydraulic lines without ha...
-
-
- Fan Clutch Tool No. 706
- The new made in the U.S.A. Fan Clutch Tool, No. 706, from A&E Hand Tools is designed for use on the following engines:International VT365, T444E,...
-
-
- TU-30A compression kit
- A&E Hand Tools' TU-30A tests compression on all major gasoline vehicle platforms domestic and foreign, including motorcycles, mini engines, snowmo...
-
-
-
-
- Ford spark plug extractor
- Cal-Van’s Ford spark plug extractor, No. 39100, is designed to pull broken and carburized spark plug electrode shields in Ford Triton engines 20...
-
-
- Ford Spark Plug Insert Installer
- New from Horizon Tool is the Ford Spark Plug Insert Installer, which is designed to aid in the repair of Ford Modular cylinder heads. According to Hor...
-
-
- Rear bearing puller
- Cal Van Tools' Rear Bearing Puller, no. 91800, quickly and easily removes rear bearing wheel axles; no more banging with a slide hammer to remover the...
-
-
- Tie-rod end tool
- Cal Van Tools's Tie-rod end tool, no. 946, is compact for an easier fit in the toolbox and smoothly, easily turns aftermarket tie rods. Simply slide t...
-
-
-
-
- 1550-1 Pneumatic Spring Compressor
- Beta Tool's 1550-1 pneumatic spring compressor for Macpherson and equivalent shock absorber springs is adjustable for size, user friendly and has a mo...
-
-
-
-
- EZ-DRIVER
- Arizona Transmission Machine introduced its EZ-DRIVER bearing installation sets. The Master set is highly adaptable, with a series of 28 interchangeab...
-
-
-
-
- 'em Back™ Thread Chasers in individual or 21-piece kits
- New from Emhart is their Heli-Coil branded Chase 'em Back™ Thread Chasers in individual or 21-piece kits. Designed for use on damaged studs, the...
-
-
- Heli-Coil M11 x 1.5 Metric Head Bolt Thread Repair Kit
- Head bolt thread repair for import engines Emhart Teknologies' Heli-Coil M11 x 1.5 Metric Head Bolt Thread Repair Kit is specially designed for repair...
-
-
- Pop Nut Blind Rivet PNT110 Manual Tool
- Emhart Teknologies expanded their line of Pop Nut Blind Rivet Nuts and Tools with the addition of two new Tool Kits: the PNT110 Manual Tool in standar...
-
-
-
-
- Toyota-Lexus Brake Fluid Exchange Adapter
- Advanced Integration, Inc. introduces the Toyota-Lexus Brake Fluid Exchange Adapter. Easy to use with quick assembly, the adapter includes a low profi...
-
-
-
-
- 1-3/8" Lighted Mirror
- Matco's 1-3/8" Lighted Mirror, No. HTE2LT, illuminates dark areas. The stainless-steel handle telescopes from 6-3/4" to 35-1/2" for fast and accurate...
-
-
- 24 mm Flare Nut Wrench Diesel
- The 24mm Flare Nut Wrench Diesel, No. MST6615, from Matco is designed to slide into the confined area of the cylinder head. Without this special wrenc...
-
-
- 7-Ton Puller/Bearing Separator No. MST4527
- Matco Tools introduces the 7-Ton Puller/Bearing Separator, No. MST4527. The bearing splitter has a 4" capacity, two sets of hex push puller legs and a...
-
-
- BTG6673 Belt Tension Gauge Tool
- Matco offers their BTG6673 Belt Tension Gauge Tool to help ensure drive belts are properly installed at the correct tension to help maximize belt and...
-
-
- Bust-N-Out 3-Step Bolt Removal System
- Matco Tools introduces an exclusive Bust-N-Out 3-Step Bolt Removal System, Nos. ZBEC5, ZBCD5 and ZBDR4. All three items are required to properly remov...
-
- See More Products from Matco Tools
-
-
-
- Powerbuilt Tools Back-Tap Tool
- The Powerbuilt Tools Back-Tap tool from Alltrade Tools offers a patented collapsible design allowing users to place the tool through the spark plug ho...
-
-
-
-
- Excalibur Metal Shear
- The handheld, fully cordless Excalibur Metal Shear cutters from Garage Equipment Supply slice through sheet metal and stainless steel at speeds up to...
-
-
-
-
- Hawg Buddy and Cycle Buddy folding tool sets
- Bondhus Corp. introduces the Hawg Buddy and Cycle Buddy folding tool sets for on-the-road servicing of most models of motorcycles. Developed specifica...
-
-
- Line of ProHold Tip screw holding tools
- Bondhus line of patented ProHold Tip screw holding tools has expanded to include: T-handles, screwdrivers and L-wrenches in both ballpoint hex and sta...
-
-
-
-
- PH113IE internal/external puller
- Posi Lock's hydraulic line featuring the patented "Safety Cage" has been expanded to include the PH113IE three-jaw, 25-ton internal/external puller. T...
-
-
- PHS-108 Self-contained pulling system
- Posi Lock's new PHS-108 is a self-contained pulling system ideal for pulling a wide variety of press-fit parts, including bearings, gears, bushings, w...
-
-
- TB-1045 puller kit
- Posi Lock® recently unveiled their TB-1045 puller kit, which includes:The 5-ton, 3-jaw Model 104 external puller, which has a reach of 4" and a sp...
-
-
-
-
- 10" Extra-Long 3/8"-Drive 5/8" Spark Plug Socket No. 4422
- The SK Hand Tool 10" Extra-Long 3/8"-Drive 5/8" Spark Plug Socket, No. 4422, offers a high-polish SuperKrome plating with a jewel-like finish, providi...
-
-
- 4419 Spark Plug Socket
- In response to a new spark plug being used in one of the world's most popular vehicles, the Ford F-150 pickup truck, SK Hand Tool introduces their 441...
-
-
- 90433 Fractional 45 Degree Double Flaring Set
- S'#9679;K Hand Tool introduces their new 90433 Fractional 45 Degree Double Flaring Set that is recommended for use on Bundy and other annealed soft tu...
-
-
-
-
- Typhoon and Typhoon Pro blow guns with extensions
- Acme Automotive expanded its line of Typhoon and metal-bodied, chemical- and solvent-resistant Typhoon Pros Blow Guns to include models with 12", 24"...
-
-
-
-
- AC300 Deluxe A/C Line Repair and Replacement Kit
- Designed for use with both rubber and aluminum, the S.U.R.&R. AC300 Deluxe A/C Line Repair & Replacement Kit can be used to make complete new...
-
-
-
-
- EEDM604C True RMS Meter
- The Snap-on auto-ranging EEDM604C True RMS Meter for hybrid vehicles, from Test Products International, carries the OEM-recommended Category Safety R...
-
-